Canon Powershot A630 Front Panel Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes            

Sections

1

• Front Panel
• 7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCanon PowerShot A630

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Front Panel               

• Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.
• Remove batteries.

Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

Remove batteries.

1024

Step 2

• Remove the three indicated .2mm screws using a Phillips #00 screwdriver.
• Gently pull off side-panel to remove it.

Remove the three indicated .2mm screws using a Phillips #00 screwdriver.

Gently pull off side-panel to remove it.

Step 3

• Remove the two indicated .2mm screws using a Phillips #00 screwdriver.

Remove the two indicated .2mm screws using a Phillips #00 screwdriver.

Step 4

• Remove the indicated .2mm screw using a Phillips #00 screwdriver.
• Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Phillips #00 screwdriver.

Remove the indicated .2mm screw using a Phillips #00 screwdriver.

Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Phillips #00 screwdriver.

Step 5

• Open ‘DIGITAL A/V OUT’ door on camera.
• Remove the two indicated .2mm screws using a Phillips #00 screwdriver.

Open ‘DIGITAL A/V OUT’ door on camera.

Step 6

• Grip the sides of the top panel and gently pull to separate the top panel from the camera body.
• The top panel will not completely detach.

Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

The top panel will not completely detach.

Step 7

• Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.
• Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Kelly Duggan                     

Member since: 10/13/2014

439 Reputation

                                      3 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Clemson, Team 2-5, Benson Fall 2014                        

                                                  Member of Clemson, Team 2-5, Benson Fall 2014 



                    CLEM-BENSON-F14S2G5                     


                                            4 Members                     


                                            18 Guides authored