Canon Powershot Elph 150 Is Card Battery Door Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

• Card/Battery Door
• 5 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackCanon Powershot ELPH 150 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Card/Battery Door               

• Safety First: Power down your camera by locating the ON/Off button on the top of the camera and holding it down until the screen and all lights on the camera go dark.

Safety First: Power down your camera by locating the ON/Off button on the top of the camera and holding it down until the screen and all lights on the camera go dark.

1024

Step 2

• Locate the CARD/BATT. OPEN door on the bottom right of the camera.

Locate the CARD/BATT. OPEN door on the bottom right of the camera.

Step 3

• In order to replace the door, you must first remove the back plate off the camera. Use this guide to do so.

In order to replace the door, you must first remove the back plate off the camera. Use this guide to do so.

Step 4

• With the backplate removed, turn the camera so that the CARD/BATT. OPEN door is face up and to the right. Press down on the door as you slide it to the right. You should hear a click which indicates that the door is unlocked and will freely open.

With the backplate removed, turn the camera so that the CARD/BATT. OPEN door is face up and to the right. Press down on the door as you slide it to the right. You should hear a click which indicates that the door is unlocked and will freely open.

Step 5

• With the CARD/BATT. OPEN door open, and the backplate off, gently pull the door from a 90 degree angle back towards you. Once you hear a pop ( a sign that one side pin has released), you can slide the door away from you to release the pin on the other side as well. Remove door.

With the CARD/BATT. OPEN door open, and the backplate off, gently pull the door from a 90 degree angle back towards you. Once you hear a pop ( a sign that one side pin has released), you can slide the door away from you to release the pin on the other side as well. Remove door.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Morgan Forester                     

Member since: 03/21/2017

260 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UMass Dartmouth, Team S6-G3, Isaacson Spring 2017                        

                                                  Member of UMass Dartmouth, Team S6-G3, Isaacson Spring 2017 



                    UMASSD-ISAACSON-S17S6G3                     


                                            3 Members                     


                                            5 Guides authored