Canon Powershot Elph 150 Is Face Plate Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 minutes            

Sections

1

• Back Plate/Menu Buttons
• 6 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCanon Powershot ELPH 150 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Plate/Menu Buttons               

• Locate the ON/Off button on the top of the camera and hold it down until the screen and all lights on the camera go dark.

Locate the ON/Off button on the top of the camera and hold it down until the screen and all lights on the camera go dark.

1024

Step 2

• Locate the back plate of the camera (contains the LCD screen and menu buttons).

Locate the back plate of the camera (contains the LCD screen and menu buttons).

Step 3

• To remove the back plate you will need to unscrew the 6 support screws securing it to the camera.
• The first 2 screws are located on the bottom of the camera.
• Remove the screws using a Phillips #00 screwdriver.

To remove the back plate you will need to unscrew the 6 support screws securing it to the camera.

The first 2 screws are located on the bottom of the camera.

Remove the screws using a Phillips #00 screwdriver.

Step 4

• Remove the next 2 screws located behind the AV port using the same Phillips #00 screwdriver.

Remove the next 2 screws located behind the AV port using the same Phillips #00 screwdriver.

Step 5

• Use a Phillips #00 screwdriver to remove the final 2 screws from the blue side panel.

Use a Phillips #00 screwdriver to remove the final 2 screws from the blue side panel.

Step 6

• Once screws are removed, gently pry the front plate and backplate apart along the seems on the bottom of the camera.
• Completely remove the back plate.

Once screws are removed, gently pry the front plate and backplate apart along the seems on the bottom of the camera.

Completely remove the back plate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Alex Larrimore                     

Member since: 03/05/2017

305 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       UMass Dartmouth, Team S6-G3, Isaacson Spring 2017                        

                                                  Member of UMass Dartmouth, Team S6-G3, Isaacson Spring 2017 



                    UMASSD-ISAACSON-S17S6G3                     


                                            3 Members                     


                                            5 Guides authored