Canon Powershot Elph 310 Hs External Panels Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 minutes            

Sections

1

• External Panels
• 7 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackCanon PowerShot ELPH 310 HS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              External Panels               

• Use the Phillips #000 screwdriver from the iFixit tool kit to unscrew the two image stabilizer panel’s 2 mm Phillips head screws.
• Using your hands, remove the image stabilizer panel.

Use the Phillips #000 screwdriver from the iFixit tool kit to unscrew the two image stabilizer panel’s 2 mm Phillips head screws.

Using your hands, remove the image stabilizer panel.

1024

Step 2

• Unscrew the two 4 mm Phillips head screws from the bottom side of the camera.

Unscrew the two 4 mm Phillips head screws from the bottom side of the camera.

Step 3

• Using your hand, open the battery portal located on the bottom left of the camera. The screw is in the bottom left of the battery portal.
• Unscrew the hidden 4mm Phillips head screw inside the battery portal.

Using your hand, open the battery portal located on the bottom left of the camera. The screw is in the bottom left of the battery portal.

Unscrew the hidden 4mm Phillips head screw inside the battery portal.

Step 4

• Remove the HDMI side panel with your hands.
• Unscrew the four 4 mm Phillips head screws from the inside of the camera.

Remove the HDMI side panel with your hands.

Unscrew the four 4 mm Phillips head screws from the inside of the camera.

Step 5

• The back side of the camera should pop off or be removed by hand.

The back side of the camera should pop off or be removed by hand.

Step 6

• Unscrew the one 3 mm Phillips head screw on the top of the camera.

Unscrew the one 3 mm Phillips head screw on the top of the camera.

Step 7

• Manually remove the front panel from the camera.

Manually remove the front panel from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Kadie Aldridge                     

Member since: 09/23/2015

213 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       University of Alabama, Team 1-4, Sydow campbell Fall 2015                        

                                                  Member of University of Alabama, Team 1-4, Sydow campbell Fall 2015 



                    UA-SYDOW CAMPBELL-F15S1G4                     


                                            4 Members                     


                                            4 Guides authored                     

Holland Van Ackeren - Jan 29, 2016

Reply

I have lost the two 4mm screws from the bottom of the camera and would like to buy replacements. Does anyone know the exact size of these screws?