Canon Powershot Elph330 Hs Camera Case Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          2 - 5 minutes            

Sections

1

• Camera Case
• 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackCanon PowerShot ELPH330 HS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Before starting your replacement for the canon case, make sure to be in a space that is dust-free and very open. During this replacement, there will be many small screws used.

What you need

Step 1

              Camera Case               

• On the top-center of your device, turn off the camera by pressing the power button.
• Put your finger on the battery door and slide the battery door to the right which will then open the door.
• Push the release button downward and it will release the battery.

On the top-center of your device, turn off the camera by pressing the power button.

Put your finger on the battery door and slide the battery door to the right which will then open the door.

Push the release button downward and it will release the battery.

1024

Step 2

• Use the Phillips #00 screwdriver to remove the two screws.

Use the Phillips #00 screwdriver to remove the two screws.

Step 3

• Remove two more screws using the Phillips #00 screwdriver.

Remove two more screws using the Phillips #00 screwdriver.

Step 4

• On the lower right side of the camera case, remove the single screw using Phillips #00 screwdriver.
• On the upper right side of the camera, remove the HDMI A/V out port.
• Beneath the port cover, remove the screw using the same Phillips #00 screwdriver.

On the lower right side of the camera case, remove the single screw using Phillips #00 screwdriver.

On the upper right side of the camera, remove the HDMI A/V out port.

Beneath the port cover, remove the screw using the same Phillips #00 screwdriver.

Step 5

• Using your fingers, carefully pry the case apart at the seam.

Using your fingers, carefully pry the case apart at the seam.

== ==

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Michelle Ngo                     

Member since: 07/23/2019

595 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UW Tacoma, Team S1-G3, Liner Summer 2019                        

                                                  Member of UW Tacoma, Team S1-G3, Liner Summer 2019 



                    UWT-LINER-SU19S1G3                     


                                            4 Members                     


                                            3 Guides authored