Difficulty

Moderate

Steps

8

Time Required

                          8 minutes

Sections

1

  • LCD Screen
  • 8 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackCanon PowerShot ELPH330 HS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Turn off your camera.
  • Remove the battery.
  • Slide the battery door open with the rubber pad on the bottom right side of the camera.
  • Remove the battery by pushing down on the release button.

Turn off your camera.

Remove the battery.

Slide the battery door open with the rubber pad on the bottom right side of the camera.

Remove the battery by pushing down on the release button.

1024

Step 2

  • Remove the two screws on the left side with a Phillips #00 screwdriver.

Remove the two screws on the left side with a Phillips #00 screwdriver.

Step 3

  • Remove the two screws on the bottom of the camera with a Phillips #00 screwdriver.

Remove the two screws on the bottom of the camera with a Phillips #00 screwdriver.

Step 4

  • Remove the two screws on the right side with a Phillips #00 screwdriver.

Remove the two screws on the right side with a Phillips #00 screwdriver.

Step 5

  • Using your fingers, carefully pry the case apart at the seam.

Using your fingers, carefully pry the case apart at the seam.

Step 6

  • Flip the camera over so that the lens is facing you.
  • Disconnect the highlighted port from the motherboard.

Flip the camera over so that the lens is facing you.

Disconnect the highlighted port from the motherboard.

Step 7

  • Remove the bracket around the LCD screen.

Remove the bracket around the LCD screen.

Step 8

  • Using the spudger, carefully pry the top to remove the LCD screen.

Using the spudger, carefully pry the top to remove the LCD screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Michelle Ngo

Member since: 07/23/2019

595 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UW Tacoma, Team S1-G3, Liner Summer 2019                        

                                                  Member of UW Tacoma, Team S1-G3, Liner Summer 2019 



                    UWT-LINER-SU19S1G3                     


                                            4 Members                     


                                            3 Guides authored