Difficulty
Easy
Steps
9
Time Required
5 minutes
Sections
2
- Back Camera Casing
- 6 steps
- Buttons
- 3 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackCanon PowerShot G1 X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Camera Casing
- To begin removing the back camera casing, unscrew the Phillips screw underneath the panel covering the USB connections on the side of the camera. Use a Phillips Head 00 screwdriver for this screw.
- Remove the screw located directly beneath the USB cover located in the second photo. Use a Phillips Head 00 screwdriver for this screw.
To begin removing the back camera casing, unscrew the Phillips screw underneath the panel covering the USB connections on the side of the camera. Use a Phillips Head 00 screwdriver for this screw.
Remove the screw located directly beneath the USB cover located in the second photo. Use a Phillips Head 00 screwdriver for this screw.
1024
Step 2
- After removing the first screw flip to the bottom side of the camera and unscrew the two screws located toward the back side of the casing. The screw on the front side can be left in. Use a Phillips Head 00 screwdriver for both of these screws.
After removing the first screw flip to the bottom side of the camera and unscrew the two screws located toward the back side of the casing. The screw on the front side can be left in. Use a Phillips Head 00 screwdriver for both of these screws.
Step 3
- Now flip to the opposite side of the USB panel screw and unscrew the two screws holding the small speaker cover portion of the camera. Use a Phillips Head 00 screwdriver for both of these screws.
Now flip to the opposite side of the USB panel screw and unscrew the two screws holding the small speaker cover portion of the camera. Use a Phillips Head 00 screwdriver for both of these screws.
Step 4
- The last screw is located towards the top side of the back of the camera next to the view finder. Unscrew by using a Phillips Head 00 screwdriver.
The last screw is located towards the top side of the back of the camera next to the view finder. Unscrew by using a Phillips Head 00 screwdriver.
Step 5
- Remove the side panel covering the speaker by gently pulling it away from the camera. You can also use spudgers to create a lever to help remove the panel.
Remove the side panel covering the speaker by gently pulling it away from the camera. You can also use spudgers to create a lever to help remove the panel.
Step 6
- Remove the back casing by gently pulling. You could also use spudger to create a lever to help pry it off.
Remove the back casing by gently pulling. You could also use spudger to create a lever to help pry it off.
Step 7
Buttons
- Remove the two screws above the buttons followed by the screw on the bottom, using a Phillips #00 screwdriver.
Remove the two screws above the buttons followed by the screw on the bottom, using a Phillips #00 screwdriver.
Step 8
- Remove the screw on the side of the buttons using a Phillips #00 screwdriver.
Remove the screw on the side of the buttons using a Phillips #00 screwdriver.
Step 9
- Gently remove buttons by hand, once all of the screws holding the buttons in are removed.
Gently remove buttons by hand, once all of the screws holding the buttons in are removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Benjamin Irvin Bunch
Member since: 02/20/2020
103 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
The Citadel Military College of South Carolina, Team S1-G3, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S1-G3, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S1G3
3 Members
2 Guides authored
