Difficulty

Easy

Steps

6

Time Required

                          2 minutes

Sections

1

  • Screen Casing
  • 6 steps

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

  • BackCanon PowerShot G1 X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen Casing
  • Remove the screws on the outside of the screen case shown in the photo.

Remove the screws on the outside of the screen case shown in the photo.

1024

Step 2

  • Remove the screws on the inside of the screen casing next to the hinge on the camera.

Remove the screws on the inside of the screen casing next to the hinge on the camera.

Step 3

  • You can now remove the back side of the screens casing. When removing this back casing there will be a clear plastic piece inside. Remove this as well. If this is the piece you are replacing, remove it and then replace it with the new piece and skip to conclusion.

You can now remove the back side of the screens casing. When removing this back casing there will be a clear plastic piece inside. Remove this as well. If this is the piece you are replacing, remove it and then replace it with the new piece and skip to conclusion.

Step 4

  • Once the plastic piece has been removed locate the two screws on the outside and inside of the casing located in the photos. Remove these screws in order to begin the process of removing the front part of the casing.

Once the plastic piece has been removed locate the two screws on the outside and inside of the casing located in the photos. Remove these screws in order to begin the process of removing the front part of the casing.

Step 5

  • Once the two screws have been removed you must then locate the four prongs on the metal piece covering the back of the screen shown in the photo. Push each of these prongs in toward there parallel and pull up on the metal casing.

Once the two screws have been removed you must then locate the four prongs on the metal piece covering the back of the screen shown in the photo. Push each of these prongs in toward there parallel and pull up on the metal casing.

Step 6

  • Once all of the prongs are pushed and the metal casing is removed you then can remove the front casing.

Once all of the prongs are pushed and the metal casing is removed you then can remove the front casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Joseph Cosgrove

Member since: 02/12/2017

310 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 20-1, Remmell Spring 2017                        

                                                  Member of USF Tampa, Team 20-1, Remmell Spring 2017 



                    USFT-REMMELL-S17S20G1                     


                                            3 Members                     


                                            4 Guides authored