Canon Powershot G11 Front Cover Replacement Repair Guide

Difficulty

Easy

Steps

11

Time Required

                          15 - 30 minutes            

Sections

2

• Rear Cover
• 8 steps
• Front Cover
• 3 steps

Flags

0

• BackCanon PowerShot G11

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cover               

• Remove the three screws on the bottom of the camera using the 00 sized phillips head screw driver.

Remove the three screws on the bottom of the camera using the 00 sized phillips head screw driver.

1024

Step 2

• Remove the four screws on the left side of the camera.

Remove the four screws on the left side of the camera.

Step 3

• Remove the screw on the right side of the camera.

Remove the screw on the right side of the camera.

Step 4

• Open up the HDMI port on the right side of the camera. Then remove the screw in the HDMI port.

Open up the HDMI port on the right side of the camera. Then remove the screw in the HDMI port.

Step 5

• Remove the screw to the right of the view finder on the rear of the camera.

Remove the screw to the right of the view finder on the rear of the camera.

Step 6

• Use the spudger to crack open the case.

Use the spudger to crack open the case.

Step 7

• The rear case is still attached to the camera with a ribbon cable. The socket has a flip up lid that must be flipped up before the cable can be removed. Use the tweezers to flip the cable attachment up.

The rear case is still attached to the camera with a ribbon cable. The socket has a flip up lid that must be flipped up before the cable can be removed. Use the tweezers to flip the cable attachment up.

Step 8

• The rear cover is now unattached from the camera.

The rear cover is now unattached from the camera.

Step 9

              Front Cover               

• Push the button on the bottom right of the camera and then remove the plastic surrounding the lens.

Push the button on the bottom right of the camera and then remove the plastic surrounding the lens.

Step 10

• Use the spudger to pop off front case.

Use the spudger to pop off front case.

Step 11

• Pull the loosened cover off and you are finished.

Pull the loosened cover off and you are finished.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Dustin Brinegar                     

Member since: 01/21/2015

661 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 5-6, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 5-6, Brown Winter 2015 



                    USFT-BROWN-W15S5G6                     


                                            3 Members                     


                                            5 Guides authored