Difficulty

Moderate

Steps

7

Time Required

                          7 - 10 minutes            

Sections

1

  • Dial
  • 7 steps

Flags

0

  • BackCanon PowerShot G7X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Dial               
  • Remove the five 2mm Phillips #000 screws that are under the screen of the camera.

Remove the five 2mm Phillips #000 screws that are under the screen of the camera.

1024

Step 2

  • Remove the two 3mm Phillips #000 screws under the AV-out digital flap.
  • Remove the two 3 mm Phillips #000 screws from the side of the camera.

Remove the two 3mm Phillips #000 screws under the AV-out digital flap.

Remove the two 3 mm Phillips #000 screws from the side of the camera.

Step 3

  • Remove the two 3 mm Phillips #000 screws on the side of camera with the flash toggle.

Remove the two 3 mm Phillips #000 screws on the side of camera with the flash toggle.

Step 4

  • Remove the four 4 mm Phillips #000 screws from the plate on the bottom of the camera.

Remove the four 4 mm Phillips #000 screws from the plate on the bottom of the camera.

Step 5

  • Remove the back plate.

Remove the back plate.

Step 6

  • Remove the three 3 mm Phillips #000 screws around the dial.

Remove the three 3 mm Phillips #000 screws around the dial.

Step 7

  • Using the nylon spudger, gently lift the ZIF tab.
  • Disconnect the ribbon cable that connects the dial to the motherboard.
  • Remove the dial from the device.

Using the nylon spudger, gently lift the ZIF tab.

Disconnect the ribbon cable that connects the dial to the motherboard.

Remove the dial from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    McKenzie Devlin                     

Member since: 04/09/2018

195 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Eastern Washington University, Team S1-G3, Carnegie Spring 2018                        

                                                  Member of Eastern Washington University, Team S1-G3, Carnegie Spring 2018 



                    EWU-CARNEGIE-S18S1G3                     


                                            4 Members                     


                                            5 Guides authored