Difficulty

Difficult

Steps

9

Time Required

                          35 minutes

Sections

2

  • Battery
  • 4 steps
  • LCD screen
  • 5 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackCanon Powershot Pro1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Locate the battery compartment cover on the right hand side of the camera. The cover features the text: “CF/BATT.OPEN”.

Locate the battery compartment cover on the right hand side of the camera. The cover features the text: “CF/BATT.OPEN”.

1024

Step 2

  • There is an arrow beside the text. Using your hands, slide the cover in the direction of this arrow.

There is an arrow beside the text. Using your hands, slide the cover in the direction of this arrow.

Step 3

  • Pull the cover toward you. After doing so you will see the battery sitting inside the compartment.

Pull the cover toward you. After doing so you will see the battery sitting inside the compartment.

Step 4

  • Press the orange battery lock inside the compartment.
  • Remove the battery.
  • This photo show the battery compartment after the battery has been removed.

Press the orange battery lock inside the compartment.

Remove the battery.

This photo show the battery compartment after the battery has been removed.

Step 5

              LCD screen
  • Open up the LCD screen.

Open up the LCD screen.

Step 6

  • Remove the 1.2 mm Phillips #0 screws on the left and right side of the LCD.
  • Using the Phillips #000 screwdriver, remove the screws on the right (you need to rotate the screen to access the screws on the right, and you will see one on each corner).

Remove the 1.2 mm Phillips #0 screws on the left and right side of the LCD.

Using the Phillips #000 screwdriver, remove the screws on the right (you need to rotate the screen to access the screws on the right, and you will see one on each corner).

Step 7

  • Remove the back cover of the LCD screen (has “Canon” written on it).

Remove the back cover of the LCD screen (has “Canon” written on it).

Step 8

  • Now you will see an exposed circuit board and the backside of the LCD.
  • Fold back the plastic covering and remove the highlighted ribbon cables with tweezers.

Now you will see an exposed circuit board and the backside of the LCD.

Fold back the plastic covering and remove the highlighted ribbon cables with tweezers.

Step 9

  • Using the nylon spudger, pry the LCD off the screen cover.
  • You can now separate the LCD from the camera.
  • Don’t use a metal spudger as this could cause damage to the device.

Using the nylon spudger, pry the LCD off the screen cover.

You can now separate the LCD from the camera.

Don’t use a metal spudger as this could cause damage to the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Seana Meegan

Member since: 09/06/2019

639 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of Alabama, Team S1-G1, Bedsole Fall 2019                        

                                                  Member of University of Alabama, Team S1-G1, Bedsole Fall 2019 



                    UA-BEDSOLE-F19S1G1                     


                                            3 Members                     


                                            10 Guides authored