Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Display Screen
- 5 steps
Flags
Missed a Step
Oops! This guide is currently missing some important steps.
BackCanon PowerShot S230
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display Screen
- Using a Phillips #0 head screwdriver, remove the screws on the outside casing of the camera.
Using a Phillips #0 head screwdriver, remove the screws on the outside casing of the camera.
1024
Step 2
- Use a pry tool to open the outer casing of the camera and access the internal components.
Use a pry tool to open the outer casing of the camera and access the internal components.
Step 3
- Remove the metal shield and screws from the bottom interior of the camera.
Remove the metal shield and screws from the bottom interior of the camera.
Step 4
- Use the Phillips head screwdriver to remove the screws securing the screen.
Use the Phillips head screwdriver to remove the screws securing the screen.
Step 5
- Remove the screws on the copper facing from the front part of the camera. Beneath is a connection to the screen. Wiggle this connection to pull it out; it may take some force to do so.
Remove the screws on the copper facing from the front part of the camera. Beneath is a connection to the screen. Wiggle this connection to pull it out; it may take some force to do so.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Will Appleton
Member since: 05/31/2016
101 Reputation
1 Guide authored
Badges:
2
Team
Central Coast New Tech High, Team 6-4, Rushing Spring 2016
Member of Central Coast New Tech High, Team 6-4, Rushing Spring 2016
CCNTH-RUSHING-S16S6G4
2 Members
2 Guides authored
