Difficulty
Very easy
Steps
5
Time Required
10 minutes
Sections
1
- Front and Rear Casing
- 5 steps
Flags
0
BackCanon PowerShot S500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Front and Rear Casing
- Unscrew five Phillips screws using a #0 Phillips screwdriver.
- One screw is on upper right corner of the back panel.
- The other four screws are on the bottom of the camera.
Unscrew five Phillips screws using a #0 Phillips screwdriver.
One screw is on upper right corner of the back panel.
The other four screws are on the bottom of the camera.
1024
Step 2
- Open the memory card cover by moving the slide switch toward the top end of of the camera.
- Remove the memory card from the slot.
Open the memory card cover by moving the slide switch toward the top end of of the camera.
Remove the memory card from the slot.
Step 3
- Remove the rear cover from the rest of the camera.
- This may require gentle rocking of the case to free it.
Remove the rear cover from the rest of the camera.
This may require gentle rocking of the case to free it.
Step 4
- Unscrew the four Phillips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.
Unscrew the four Phillips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.
Step 5
- Free the front cover from the rest of the camera.
- The cover may require gentle rocking to remove.
Free the front cover from the rest of the camera.
The cover may require gentle rocking to remove.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Nathan Balcom
Member since: 01/21/2010
81 Reputation
8 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 16-28, Maness Winter 2010
Member of Cal Poly, Team 16-28, Maness Winter 2010
CPSU-MANESS-W10S16G28
4 Members
8 Guides authored
