Canon Powershot Sd1300 Is Flash Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 25 minutes            

Sections

1

• Flash Assembly
• 5 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

• BackCanon PowerShot SD1300 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Flash Assembly               

• Remove the two 2mm J00 screws on the right exterior.
• Remove a single 4 mm J00 on the bottom exterior.
• Remove a single 3mm J00 on the left exterior.

Remove the two 2mm J00 screws on the right exterior.

Remove a single 4 mm J00 on the bottom exterior.

Remove a single 3mm J00 on the left exterior.

1024

Step 2

• Once the front shell of the camera is removed the back shell should slide off just the same.

Once the front shell of the camera is removed the back shell should slide off just the same.

Step 3

• Remove a 3mm J00 screw from behind wires under the flash.

Remove a 3mm J00 screw from behind wires under the flash.

Step 4

• Use plastic opening tool to remove the screen to gain access to the screws to remove the Flash Assembly.

Use plastic opening tool to remove the screen to gain access to the screws to remove the Flash Assembly.

Step 5

• Remove the two 3mm J00 screws under the screen.
• Remove the 4mm J00 screws under the screen.
• The flash assembly is now released and should be able to be removed from the front side of the camera.

Remove the two 3mm J00 screws under the screen.

Remove the 4mm J00 screws under the screen.

The flash assembly is now released and should be able to be removed from the front side of the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Clayton                     

Member since: 03/20/2017

560 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Texas Tech, Team S13-G1, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S13-G1, Bennett Spring 2017 



                    TTU-BENNETT-S17S13G1                     


                                            5 Members                     


                                            5 Guides authored