Difficulty
Easy
Steps
4
Time Required
30 seconds - 2 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackCanon PowerShot SD1400 IS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- The battery compartment is located on the bottom of the camera, below the user interface panel.
The battery compartment is located on the bottom of the camera, below the user interface panel.
1024
Step 2
- The hatch covering the memory card will slide open towards the corner of the device.
The hatch covering the memory card will slide open towards the corner of the device.
Step 3
- Once the hatch is slid so the end is overhanging the edge of the camera, you will be able to lift it open.
Once the hatch is slid so the end is overhanging the edge of the camera, you will be able to lift it open.
Step 4
- Once open, you will see a small orange tab near the corner of the camera.
- Push this tab towards the front face of the device, and the battery will freely fall out from the hatch.
Once open, you will see a small orange tab near the corner of the camera.
Push this tab towards the front face of the device, and the battery will freely fall out from the hatch.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Matt Holquist
Member since: 02/01/2018
133 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
Baylor, Team S1-G3, Johnson Spring 2018
Member of Baylor, Team S1-G3, Johnson Spring 2018
BU-JOHNSON-S18S1G3
3 Members
4 Guides authored