Difficulty

Moderate

Steps

9

Time Required

                          10 - 20 minutes

Sections

3

  • Back Cover
  • 2 steps
  • Front Cover
  • 2 steps
  • Motherboard
  • 5 steps

Flags

0

  • BackCanon PowerShot SD30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the wrist strap and battery before removing the back cover.
  • Remove the 2mm screw from the back of the camera.
  • Remove two 2mm screws from the bottom of the camera.
  • Remove two 2mm screws the left side of camera.

Remove the wrist strap and battery before removing the back cover.

Remove the 2mm screw from the back of the camera.

Remove two 2mm screws from the bottom of the camera.

Remove two 2mm screws the left side of camera.

1024

Step 2

  • Gently remove the back cover.

Gently remove the back cover.

Step 3

              Front Cover
  • Be sure to remove the wrist strap and battery before removing the cover.
  • Remove the two 2mm black screws that are located on the underside of the camera.
  • Remove the two 3mm silver screws from the right side of camera.

Be sure to remove the wrist strap and battery before removing the cover.

Remove the two 2mm black screws that are located on the underside of the camera.

Remove the two 3mm silver screws from the right side of camera.

Step 4

  • Gently remove the front cover.

Gently remove the front cover.

Step 5

              Motherboard
  • Unscrew the 3mm silver screw from the top of the camera.
  • Gently remove the top button panel.

Unscrew the 3mm silver screw from the top of the camera.

Gently remove the top button panel.

Step 6

  • Using the tweezers, carefully lift up the 2 folds where the ribbon connects to the motherboard.
  • Now, lift up the three remaining ribbon connectors to disconnect them.

Using the tweezers, carefully lift up the 2 folds where the ribbon connects to the motherboard.

Now, lift up the three remaining ribbon connectors to disconnect them.

Step 7

  • Unscrew the three 3mm silver screws from the motherboard.

Unscrew the three 3mm silver screws from the motherboard.

Step 8

  • Gently pull the left wire out and disconnect it from the device.
  • Use the tweezers to pop the right set of wires out of the connector. Do this by positioning the tweezers under the connector and lifting up.

Gently pull the left wire out and disconnect it from the device.

Use the tweezers to pop the right set of wires out of the connector. Do this by positioning the tweezers under the connector and lifting up.

Step 9

  • Remove the motherboard from the device.
  • The motherboard will have nothing connecting it to anything, so be sure to have it grasped.

Remove the motherboard from the device.

The motherboard will have nothing connecting it to anything, so be sure to have it grasped.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Ime Ekpo

Member since: 09/21/2018

479 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       University of North Texas, Team S5-G3, Thompson Fall 2018                        

                                                  Member of University of North Texas, Team S5-G3, Thompson Fall 2018 



                    UNT-THOMPSON-F18S5G3                     


                                            4 Members                     


                                            5 Guides authored