Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Camera Case
- 2 steps
Flags
0
BackCanon PowerShot SD400
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The casing is the plastic outter shell of the camera that protects the interior components from weather and damage. Should the casing become cracked, or otherwise compromised, it is important to replace the casing as soon as possible to prevent other components from being damaged.
What you need
Step 1
Camera Case
- Remove the 6 screws holding the casing in place located on the bottom, left and right sides of the camera using a Phillips Screwdriver.
- Be sure to save the removed screws to allow for easier reassembly.
Remove the 6 screws holding the casing in place located on the bottom, left and right sides of the camera using a Phillips Screwdriver.
Be sure to save the removed screws to allow for easier reassembly.
1024
Step 2
- Gently separate the camera casing.
- Once opened, the strap plate and disk pieces will also separate from the camera.
Gently separate the camera casing.
Once opened, the strap plate and disk pieces will also separate from the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Yi Huang Ke
Member since: 10/18/2011
51 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
James Madison, Team 1-1, Allen Fall 2011
Member of James Madison, Team 1-1, Allen Fall 2011
JMU-ALLEN-F11S1G1
4 Members
4 Guides authored
