Canon Powershot Sd550 Outer Case Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 minutes            

Sections

1

• Outer Case
• 6 steps

Flags

0

• BackCanon PowerShot SD550

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Outer Case               

• Remove the battery and SD card from the camera.

Remove the battery and SD card from the camera.

1024

Step 2

• Remove the three 3.8 mm screws from the underside of the camera.
• Each of the screws is slightly different, so it is important that you note the original location of each screw.

Remove the three 3.8 mm screws from the underside of the camera.

Each of the screws is slightly different, so it is important that you note the original location of each screw.

Step 3

• Remove the 3.2 mm screw from the right side of the camera.
• Remove the 2.2 mm screw from the right side of the camera.
• One of these screws is hidden under the USB port cover.
• Lift the side panel off.
• Remove the 1.8 mm screw from underneath the side panel.

Remove the 3.2 mm screw from the right side of the camera.

Remove the 2.2 mm screw from the right side of the camera.

One of these screws is hidden under the USB port cover.

Lift the side panel off.

Remove the 1.8 mm screw from underneath the side panel.

Step 4

• Remove the two 2.2 mm screws from the left side of the camera.
• Lift the plate from the camera.

Remove the two 2.2 mm screws from the left side of the camera.

Lift the plate from the camera.

Step 5

• Gently lift the rear of the case to remove it from the camera.

Gently lift the rear of the case to remove it from the camera.

Step 6

• Remove the front of the camera body.
• Be sure to keep track of the rubber ring.

Remove the front of the camera body.

Be sure to keep track of the rubber ring.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Matthew Theiss                     

Member since: 04/14/2011

149 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 18-23, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 18-23, Garner Spring 2011 



                    CPSU-GARNER-S11S18G23                     


                                            5 Members                     


                                            7 Guides authored