Canon Powershot Sd870 Is Outer Case Replacement Repair Guide

Difficulty

Very easy

Steps

6

Time Required

                          5 - 10 minutes            

Sections

1

• Outer Case
• 6 steps

Flags

0

• BackCanon PowerShot SD870 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Outer Case               

• Remove the wrist strap, if present.
• Remove the lithium-ion battery.

Remove the wrist strap, if present.

Remove the lithium-ion battery.

1024

Step 2

• Remove the two 4 mm Phillips #00 screws on the bottom of the camera.
• Remove the screw next to the wrist strap attachment.
• Pull up the “A/V OUT DIGITAL” cover and remove the screw above the USB port.

Remove the two 4 mm Phillips #00 screws on the bottom of the camera.

Remove the screw next to the wrist strap attachment.

Pull up the “A/V OUT DIGITAL” cover and remove the screw above the USB port.

Step 3

• Carefully unhook the “A/V OUT DIGITAL” cover from the hinge.

Carefully unhook the “A/V OUT DIGITAL” cover from the hinge.

Step 4

• Pull the front cover from the camera by using gentle upward pressure.

Pull the front cover from the camera by using gentle upward pressure.

Step 5

• Remove the two Phillips #00 screws from the flat end of the camera.
• Remove the black L-shaped side cover plate.
• Remove the silver u-shaped retainer plate.

Remove the two Phillips #00 screws from the flat end of the camera.

Remove the black L-shaped side cover plate.

Remove the silver u-shaped retainer plate.

Step 6

• Slide the back casing off.

Slide the back casing off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 13 other contributors 

                    Zach pelley                     

Member since: 04/19/2010

79 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 10-45, Garner Spring 2010                        

                                                  Member of Cal Poly, Team 10-45, Garner Spring 2010 



                    CPSU-GARNER-S10S10G45                     


                                            4 Members                     


                                            6 Guides authored