Difficulty
Easy
Steps
2
Time Required
2 minutes
Sections
1
- Lithium Ion Battery
- 2 steps
Flags
0
BackCanon PowerShot SX10 IS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lithium Ion Battery
- Open the door. Release the catch by sliding it towards the side of the camera.
- Then slide the door towards the front of the camera.
Open the door. Release the catch by sliding it towards the side of the camera.
Then slide the door towards the front of the camera.
1024
Step 2
- Remove AA batteries.
- Using a fingernail or iFixit opening tools to pry up the battery cradle.
- Remove CR1220 battery from the cradle.
Remove AA batteries.
Using a fingernail or iFixit opening tools to pry up the battery cradle.
Remove CR1220 battery from the cradle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Paul Spillan Jr
Member since: 04/04/2019
249 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Oregon Institute of Technology, Team S2-G6, Lancaster Spring 2019
Member of Oregon Institute of Technology, Team S2-G6, Lancaster Spring 2019
OIT-LANCASTER-S19S2G6
3 Members
5 Guides authored
