Canon Powershot Sx150 Is Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Canon PowerShot SX150 IS Battery Removal
• 1 step
• Buttons
• 4 steps

Flags

0

• BackCanon PowerShot SX150 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Canon PowerShot SX150 IS Battery Removal               

• Locate the battery cover on the bottom of the camera.
• Slide the battery compartment cover the direction the arrow is pointing to open the compartment.
• Remove batteries.

Locate the battery cover on the bottom of the camera.

Slide the battery compartment cover the direction the arrow is pointing to open the compartment.

Remove batteries.

1024

Step 2

              Buttons               

• Remove the two, 2mm screws from the top of the screen. Using the J000 screwdriver.
• Remove the 3, 5mm screws on either side of the camera. continue to use the same screwdriver from step 1.

Remove the two, 2mm screws from the top of the screen. Using the J000 screwdriver.

Remove the 3, 5mm screws on either side of the camera. continue to use the same screwdriver from step 1.

Step 3

• Remove the two, 4mm screws from the bottom of the camera. Continue using the same screwdriver from step 1.

Remove the two, 4mm screws from the bottom of the camera. Continue using the same screwdriver from step 1.

Step 4

• Remove back plate from the camera and locate the orange button plate to the right of the screen.

Remove back plate from the camera and locate the orange button plate to the right of the screen.

Step 5

• Once the back plate is removed. Locate the buttons to the right of the screen.
• Using the tweezers carefully lift up the tabs connecting the buttons to the button plate.
• After lifting the tabs the buttons should come right off, then replace with the new button.

Once the back plate is removed. Locate the buttons to the right of the screen.

Using the tweezers carefully lift up the tabs connecting the buttons to the button plate.

After lifting the tabs the buttons should come right off, then replace with the new button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Sam Blanton                     

Member since: 09/12/2016

455 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Western Carolina University, Team 1-1, Virtue Fall 2016                        

                                                  Member of Western Carolina University, Team 1-1, Virtue Fall 2016 



                    WCU-VIRTUE-F16S1G1                     


                                            4 Members                     


                                            7 Guides authored                     

robert jones - Sep 19, 2018

Reply

Where do you buy replacement buttons/parts. Canon offers service but i don’t see parts?