Canon Powershot Sx150 Is Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          7 - 20 minutes            

Sections

1

• Screen
• 6 steps

Flags

0

• BackCanon PowerShot SX150 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Remove the 2 outer 5mm screws using the size J000 screwdriver.
• Remove the one 5mm screw on the left and the two 4mm screws on the bottom.
• Remove the two 2mm screws located above the screen on the back of the camera.

Remove the 2 outer 5mm screws using the size J000 screwdriver.

Remove the one 5mm screw on the left and the two 4mm screws on the bottom.

Remove the two 2mm screws located above the screen on the back of the camera.

1024

Step 2

• Remove the plastic panel surrounding the screen. (it should pop off easily)
• Remove the one 5mm screws on the right using the size J000 screw driver from the button plate. Remove the two 4mm screws on the left, then move the button plate out of the way.
• carefully unlatch and then detach the button plat’s flex ribbon from the motherboard.

Remove the plastic panel surrounding the screen. (it should pop off easily)

Remove the one 5mm screws on the right using the size J000 screw driver from the button plate. Remove the two 4mm screws on the left, then move the button plate out of the way.

carefully unlatch and then detach the button plat’s flex ribbon from the motherboard.

Step 3

• Lift the flex ribbon lock gently with your finger.

Lift the flex ribbon lock gently with your finger.

Step 4

• Use the tweezers to carefully detach the screen’s flex ribbon from the circuit board.
• Any small tear could ruin the flex ribbon. Be very gentle while removing it.

Use the tweezers to carefully detach the screen’s flex ribbon from the circuit board.

Any small tear could ruin the flex ribbon. Be very gentle while removing it.

Step 5

• Remove the two 2mm screws from the bottom of the screen with the size J000 screw driver.

Remove the two 2mm screws from the bottom of the screen with the size J000 screw driver.

Step 6

• Lift the screen out.

Lift the screen out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Madison King                     

Member since: 09/12/2016

310 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Western Carolina University, Team 1-1, Virtue Fall 2016                        

                                                  Member of Western Carolina University, Team 1-1, Virtue Fall 2016 



                    WCU-VIRTUE-F16S1G1                     


                                            4 Members                     


                                            7 Guides authored