Canon Powershot Sx160 Is Format Wheel Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes            

Sections

1

• Format Wheel
• 5 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackCanon PowerShot SX160 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Format Wheel               

• Use a #0 phillips screwdriver to unscrew the two black 4.8mm phillips head screws from the back of the camera.
• The screws are located directly above the LCD screen.

Use a #0 phillips screwdriver to unscrew the two black 4.8mm phillips head screws from the back of the camera.

The screws are located directly above the LCD screen.

1024

Step 2

• Use a #0 phillips screwdriver to unscrew the two black 4.8mm phillips head screws from the side of the camera.
• Use a #0 phillips screwdriver to unscrew the two black 4.8mm phillips head screws from the bottom of the camera.

Use a #0 phillips screwdriver to unscrew the two black 4.8mm phillips head screws from the side of the camera.

Use a #0 phillips screwdriver to unscrew the two black 4.8mm phillips head screws from the bottom of the camera.

Step 3

• Use your hands to gently separate the back plate from the camera.
• Slowly pull off the camera plate until it fully detaches from the camera.

Use your hands to gently separate the back plate from the camera.

Slowly pull off the camera plate until it fully detaches from the camera.

Step 4

• Use your hands to gently separate the front plate from the camera.
• Slowly pull off the camera plate until it fully detaches from the camera.

Use your hands to gently separate the front plate from the camera.

Step 5

• Locate and replace the format wheel on the front panel of the camera.

Locate and replace the format wheel on the front panel of the camera.

Congratulations, you have successfully replaced your format wheel. To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Jamie Secretan                     

Member since: 03/11/2015

1,885 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Colorado Springs, Team 2-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-3, Panko Spring 2015 



                    UCCS-PANKO-S15S2G3                     


                                            3 Members                     


                                            6 Guides authored